|Ad / Newspaper Racks|
Outdoor ad racks take a beating. Daily use, graffiti, damaging UV rays and varying weather all degrade the appearance and functionality of this advertising asset.
|corrosion-resistance metal reduce-overhead uv-protection xs-100 issues substrate coatings|
An indoor interactive attraction, housed in a stylized castle complete with its own dragon needed a protective coating that would require minimum maintenance and maximum fire protection.
|astm-e-84 fire-protection low-maintenance reduce-overhead xs-152 issues coatings|
|Amusement Park Tram|
Fiberglass / Gelcoat cracks, chips and splinters. The maintenance and replacement costs alone can be a huge hit to your bottom line. That once smooth, beautiful finish very quickly deteriorates into an eyesore which can become a liability to customers and workers. Conventional solutions just don’t provide durability or longevity.
|eyesore fiberglass gel-coat liability xs-100 xtra issues substrate coatings|
|Amusement Park Waterslide|
The fiberglass waterslide at an amusement park was having problems with water leaking from the launch pad onto the wooden structure and staircase causing unsightly mold and mildew growth.
|fiberglass uv-protection waterproofing xs-310 substrate issues coatings|
|ASPART-X Garage Floor|
With a growing number of flooring options on the market, homeowners across the country are looking for permanent and worry-free flooring solutions. Thanks to the advances in high performance coatings, garage floors can now be durable and beautiful.
|aspart-x concrete flooring uv-protection coatings substrate issues|
|ASPART-X Hospital Sidewalk|
A Women’s and Children’s Hospital recently updated an existing sidewalk. The 30 year old concrete sidewalk was severely damaged due to age and exposure to the elements.
|aspart-x concrete flooring uv-protection coatings substrate issues|
|Biodiesel Tank Lining|
A biodiesel company in Europe was searching for a cost-effective means of preventing chemical corrosion within their 300 m2 concrete biodiesel tank. The tank, and fuel inside, could face serious issues if not properly sealed.
|chemical-resistance concrete xs-350 issues substrate coatings|
Many boats are constructed using gel coating reinforced with fiberglass. Often these boats are prone to damage from floating debris such as logs and old pilings. Damage can also occur when beaching a boat on a gravel or rocky shore. Once the fiberglass coating on the keel has been chipped or damaged, water can leak through the hull and into the boat.
|fiberglass gel-coat issues xs-100 xs-350 substrate coatings|
A bottled water production facility had an existing epoxy coating flooring that was cracked and peeled in many high traffic areas where machinery, equipment and people frequently move about.
|aspart-x concrete flooring no-vocs uv-protection coatings substrate issues|
Concrete, with its porosity and high-pH, is susceptible to many forms of decay. Continuing maintenance on concrete structures is a very costly necessity; corroding concrete lose sits strength and structural integrity and often leads to corrosion of the rebar within.
|concrete epx high-ph sf-515 xs-350 substrate coatings issues|
A retrofitting company needed a solution that would provide a moisture barrier for their buses, preventing water damage and leakage.They also needed the solution to be time efficient preventing extensive downtime.
|eyesore flooring liability low-maintenance wood xs-100 issues substrate coatings|
|Bus Luggage Compartment|
Customers of a bus company frequently complained that bags stored in the luggage compartment were being damaged during transit
|eyesore liability metal reduce-overhead xs-100 issues substrate coatings|
FEMA transports communications equipment, medical supplies and other aid in the back of trailers. While a wide variety of configurations and materials are used in the construction of these trailers, in time the wooden or metal interior may weaken due to water damage or corrosion.
|corrosion-resistance fiberglass metal waterproofing wood xs-100 issues substrate coatings|
|Chip and Seal Spreader|
The County Public Works Department resurfacing spreader required continuous repair each year. Since the spreader is used only a few months of the year, the department was forced to park it outdoors in the elements the remaining several months. The spreader would rust and corrode requiring extensive repair before use the following year.
|metal rust-protection sf-515 xs-350 substrate issues coatings|
A church’s baptistry is the center piece to perhaps the most sacred celebration of faith. It is also an enormous investment. Over time and through continual use it can deteriorate. Cracks and chips aren’t just unsightly, they permit leakage compromising the structural integrity of the entire area, requiring costly repairs and replacement.
|concrete corrosion-resistance low-maintenance metal rust-protection waterproofing xs-350 substrate issues coatings|
|City Trash Cans|
Given what people throw away, trashcans quickly become full of water, soda, food waste and other corrosive liquids. As a result, the cans become difficult to clean and may rust from the inside out. Similarly, the outside of trash cans receive rough treatment from the public and trash disposal companies.
|corrosion-resistance eyesore low-maintenance metal reduce-overhead rust-protection xs-100 xtra issues substrate coatings|
|Closed Cell Foam Environmental Floats|
A private environmental monitoring agency was looking for a solution to protect their floating foam buoys. The buoys carry a variety of waterborne instruments designed to collect environmental data such as contaminants during construction projects, oxygen levels during fish spawning seasons, or other desired data.
|durability foam issues waterproofing xs-350 substrate coatings|
|Commercial Foundation Waterproofing|
Concrete is extremely susceptible to water damage. Because concrete is porous, water can easily permeate a building’s foundation causing damage. The best way to prevent water from penetrating concrete is to seal any pores and cracks with a waterproof membrane on the outside of the foundation.
|concrete epx high-ph waterproofing xs-350 substrate coatings issues|
|Commercial HVAC Unit|
Commercial HVAC units are a major investment for businesses. Overtime, drip pans rust, corrode and eventually leak. “Ponding” and seepage lead to leakage into interior spaces. The resulting structural and cosmetic damage can cost a fortune to repair. Mold removal and abatement, lost time and use, all take their toll on your bottom line.
|corrosion-resistance issues low-maintenance metal reduce-overhead rust-protection waterproofing xs-100 substrate coatings|
Commercial refrigeration units are a major investment for your business. Gasses and by-products given off by spoiled contents will lead to rust and corrosion, eventually destroying the floors and walls. Maintenance,let alone replacement costs can be enormous. With health department oversight, the condition is of para-mount importance. Chemical and biological contamination can bring business to a screeching halt.
|concrete fda-approved metal xs-100 substrate issues coatings|
|Commercial Refrigeration and Freezer|
The food service industry has a challenge with the cleanliness and preservation of its refrigeration and freezer units. Over time the food products inside them drip and spoil. The spoilage forms areas of mold and other unhealthy environments which becomes a problem for maintaining health and safety standards. High salt levels and acid content from food and marinades also accelerate corrosion on the interior surfaces of the refrigerator or freezer.
|concrete fda-approved flooring low-maintenance metal reduce-overhead substrate issues|
|Commercial Trailer Safety Pad|
In the trucking industry, safety is always an important area of consideration. One particular concern is the safety of workers loading and unloading commercial trailers. Often the metal floor inside a trailer can be slick due to water and debris. The slick surface creates a safety hazard for those working in and around these area
|flooring issues metal safety traction-aggregate wood substrate|
A popular public fountain designed by a Swedish sculptor and glass artist underwent a recent structural refurbishment. The fountain’s six-by-seven meter concrete floor needed a more durable waterproof barrier.
|concrete corrosion-resistance eyesore low-maintenance uv-protection waterproofing xs-310 xtra substrate issues coatings|
|Concrete Water Storage|
In order to provide an economical method of storing potable water and reducing evaporation losses, public water systems in Mexico are often constructed in sunken concrete tanks which are covered with a concrete roof. The roof is supported by vertical concrete pillars which sit in the water. Over time the chlorine used to purify the water leaches into the vertical pillars, attacks the concrete and steel rebar, and ultimately causes them to structurally fail.
|concrete corrosion-resistance reduce-overhead sf-515 waterproofing xs-350 substrate issues coatings|
|Concrete Water Tanks|
Water tanks, especially for storing rainwater, are a vital part of sustainable living. Rainwater tanks are often made of concrete and can be used for storing drinking water, water for irrigation or fire suppression. Concrete is usually the preferred material because they are durable, keep water cool and is relatively inexpensive. The problem lies in the fact that concrete is porous. A concrete water tank must be sealed to prevent water from leaking out and contaminants from leaching in.
|concrete fda-approved waterproofing xs-350 substrate issues coatings|
|Cruise Ship Shower|
The Cruise Industry is a challenging customer for both environmental and financial reasons. The marine environment where the ships typically operate is warm and humid. This puts corrosion and mold prevention at a premium. Additionally, the ships only make money for the owners when they are underway with passengers embarked. This makes in-port maintenance time a premium.
|aspart-x eyesore fiberglass uv-protection waterproofing xs-350 coatings issues substrate|
The owners of a local welding shop were becoming extremely frustrated at having to constantly repaint the beds of their trucks due to steel and other metalwork scratching the paint during hauling. The owners needed a solution for the trucks that would last longer and protect better than the paint, while keeping the professional look of the trucks. Company image was very important to the owners.
|corrosion-resistance eyesore metal rust-protection xs-100 issues substrate coatings|
|Delivery Truck Bumpers|
Bumpers on the delivery trucks of an Iowa based beer distributor were being corroded during normal driving conditions. Rocks and debris easily chipped the thin paint exposing the steel underneath. Salt, tar and other harsh road chemicals were then able to corrode the metal bumper, compromising its integrity and appearance. This situation forced the beer distributor to repaint the bumpers every year.
|abrasion-resistance impact-resistant metal premium xs-100 xtra issues substrate coatings|
Dialysate is the main chemical used in dialysis and is very corrosive. Epoxy and vinyl floor coatings fail because any spilled or leaked dialysate penetrates the coating and attacks the underlying concrete floor.When the failure is ignored, moisture leaks down to lower floors and walls leading to more damage.
|aspart-x chemical-resistance concrete corrosion-resistance sanitation xs-310 coatings issues substrate|
The oil and gas industry often uses chromium piping (also referred to as corrosion resistant alloy tubing or CRA tubing) in wells that extract oil or gas. This piping is susceptible to dissimilar metal corrosion, meaning that it oxidizes or corrodes simply by being in contact with another metal such as steel. At a price tag of $40,000-$60,000 per pipe, this is a big problem.
|dissimilar-metals metal xpm xs-100 issues substrate coatings|
A leading custom drum manufacturer was experiencing issues with their drums being scratched and damaged due to the continuous packing/unpacking at each tour stop as well as during travel and ship-ping.
|abrasion-resistance durability metal wood xs-100 xtra issues substrate coatings|
A service company used a fleet of dump trucks but found that the materials being hauled in the trucks caused serious damage to the truck beds. The materials eroded the paint and exposed the bare metal underneath to the risk of rust. The contents of the loads also dented the floors, making it increasingly difficult to get the material to slide out completely. This resulted in increased maintenance cycles and upkeep costs.
|corrosion-resistance cu-400 metal rust-protection sf-515 issues coatings substrate|
|Dump Truck Rail|
Dump and spreader bodies look great when they’re brand new, but they quickly deteriorate under normal use. Aggregate and other haul material exits the spreader body and lands on the sloping edges, chip-ping the thin paint and exposing the steel underneath to rust. The rusty,damaged look of the body also weakens the company image and association with quality.
|low-maintenance metal rust-protection sf-515 xs-100 xtra issues substrate coatings|
|Electrical Pullbox Covers|
Enmax was concerned that their steel “pullboxes” posed a safety hazard during wet conditions and in the winter months. When the covers are wet, they are slippery for pedestrian traffic which creates a potential serious liability issue. With age, covers can be worn even smoother causing further risk of injury.Corrosion was also a concern as the covers are exposed to the elements and to the added detrimental effects resulting from road salt application.
|rust-protection traction-aggregate xpm xs-100 issues coatings|
Plywood and aluminum equipment lockers. Diamond plate deck plates.They take a beating. You need protection from rust, corrosion, abrasion, slip hazards. The maintenance and replacement costs along with liability issues can be a huge hit to your bottom line. Conventional solutions just don’t provide durability or longevity. They don’t give you a full spectrum of protection. It takes more.
|chemical-resistance dent-resistence impact-resistant metal traction-aggregate wood xs-100 issues substrate coatings|
Unprotected foam flotation billets can negatively impact the environment and wildlife. Foam can be damaged by debris, sunlight and chemicals.Rodents and other creatures like to nest in foam, causing heavy further breakdown. The foam can also absorb water over time making docks heavier and less buoyant. Unencapsulated floats are now prohibited in many areas and clean-up efforts of water bodies has shown that a large percentage of the debris collected is often foam.
|encapsulate foam waterproofing xs-350 issues substrate coatings|
Expedition vans are rugged, purpose built vehicles meant for long distance off-road adventure trips. These off-road driving environments commonly cause rust, corrosion, paint scratches or rock chips, dents, and other general wear and tear of vehicles. Adventurers seek a solution to extend the life of their expedition vans and require a durable coating that can withstand the abuse of the extreme outdoor conditions.
|abrasion-resistance dent-resistence impact-resistant low-maintenance metal reduce-overhead rust-protection traction-aggregate ultra wood xpm issues substrate coatings|
Several fan shrouds were located in an open warehouse. The exposed sharp edges of the shrouds created a risk of injury to people in the ware-house. Because the shrouds were black and they blended into the background, accelerating the risk for accidental injury. OSHA considered the fan shrouds to be a workplace hazard.
|encapsulate liability metal osha safety xs-100 xtra issues substrate coatings|
|Fiberglass Production Chutes|
A factory that produces soft drinks made of apples had an issue with the chutes that transports apples through the production plant.The fiberglass chutes had become very worn, often breaking down due to the large volume of apples processed on a daily basis. When the chutes broke down, it would create a costly disruption in production, and ultimately profit. For many years, fiberglass had been applied and reapplied to fix the problems but without success.
|durability fda-approved fiberglass impact-resistant low-maintenance reduce-overhead sanitation waterproofing xs-350 issues substrate coatings|
From the moment a typical fire hydrant is installed it begins to rust.Maintenance programs to rectify this problem are labor intensive and costly. Left untreated, a hydrant can quickly become unsightly and a safety hazard.
|eyesore metal reduce-overhead rust-protection safety xpm xs-100 xtra issues substrate coatings|
Fire trucks have numerous compartment, spaces, and storage compartments which all require specialized protection. Fire trucks are constantly be subjected to high traffic of people and equipment being loaded or unloaded, which can cause parts to wear. Additionally, these fire trucks will be subjected to environments with a lot of water or other chemicals which leads slick surfaces, and component rusting and corrosion.
|abrasion-resistance chemical-resistance durability fiberglass metal rust-protection traction-aggregate waterproofing wood xpm xs-100 xs-350 issues substrate coatings|
The client required a solution that would protect the fish pond liners from leaking while withstanding the abuse of the bricks. Turnaround time was extremely important. The Koi Carp living in the fish ponds would need to be transferred to temporary tanks during the process.
|concrete durability low-maintenance no-vocs sf-515 waterproofing xs-350 substrate issues coatings|
|Food Processing Facility|
A major grocery chain outlet contacted LINE-X seeking a solution to an ongoing issue of maintenance and cleaning difficulties in their meat cutting department. Painted surfaces were difficult to clean and peeling paint from overhead duct runs presented an unsanitary and unappealing appearance.
|eyesore fda-approved metal sanitation xs-100 issues substrate coatings|
Wherever food is being handled or prepared, cleanliness is imperative.With conventional construction materials the food service industry has the constant challenge of keeping floors, walls, and work areas sealed from contamination. In adverse conditions metal corrodes, concrete and tiles crack and wood rots.
|abrasion-resistance concrete corrosion-resistance durability fda-approved impact-resistant metal sanitation wood xs-100 xtra issues substrate coatings|
Damp basements are a frequent complaint of homeowners. A majority of new homes develop basement leaks within 10 to 15 years, largely due to the concrete foundation. Because concrete is porous, water can easily permeate deep into cracks and pores causing damage.
|concrete issues waterproofing xs-310 substrate coatings|
Utility trucks are the workhorse for countless business’s in an around San Diego. Protecting the body and compartments with LINE-X not only prevents corrosion and denting but with aggregate added we can ensure your employees don’t slip or hurt themselves. Not only does this protect employees it protects from unnecessary insurance, liability and worker compensation claims.
|chemical-resistance corrosion-resistance impact-resistant liability metal rust-protection safety traction-aggregate waterproofing xs-100 issues substrate coatings|
|Full Body Truck ULTRA|
Truck owners looking to prolong the life of their investment require a durable coating solution that can withstand the abuse of the extreme conditions pickups are exposed to. Additionally, overall aesthetics are very important as many owners desire rugged durability and an aesthetic exterior coating for daily driving.
|durability encapsulate impact-resistant metal plastic ultra issues substrate coatings|
|Full Truck Wrap|
Over time, wear from gravel roads, sun exposure, scratches and dents can cause a vehicle’s paint finish to deteriorate. This produces a dull, aged look, and can lead to rusting if left untreated.To prevent rust for good, a fully coated LINE-X truck creates an impenetrable barrier that will protect your truck from small scratches to serious abrasion
|abrasion-resistance corrosion-resistance dent-resistence durability impact-resistant metal plastic premium scratch-resistance ultra xs-100 xtra issues substrate coatings|
|Garbage Truck Cab Roof|
Garbage sludge is particularly corrosive and can rapidly deteriorate any metal surface that is exposed to it.Front loading garbage trucks are particularly at risk for corrosive damage since the cab roof and splash guards common to these vehicles are only protected with a thin layer of paint. Repairing and repainting these surfaces causes unwanted downtime and added maintenance costs. Deep corrosion often means removing and replacing the entire cab roof.
|abrasion-resistance chemical-resistance corrosion-resistance eyesore low-maintenance metal premium reduce-overhead scratch-resistance xs-100 xtra issues substrate coatings|
|Gold Mine Tanks|
Seven gold mine leachate tanks manufactured in Argentia, Newfoundland were being corroded due to the harsh chemicals used in mining. Aggregates in the tanks, such as heavy metals, rocks, and ore were causing abrasion to the tanks. Client specifications required a high performance protective coating that included chemical resistance, abrasion resistance and durability in order to protect the tanks from damage.
|chemical-resistance corrosion-resistance durability impact-resistant metal xs-350 issues substrate coatings|
|Golf Course Bridge|
Golf courses and other outdoor recreation areas have an ongoing challenge of providing attractive and safe areas for patrons. Wooden bridges are commonly used to give people easy access over streams and gullies. However, wooden bridges can become slippery due to rain, dew and moss. If not treated properly, these bridges can deteriorate over time marring the pristine landscape that the golf course takes pride in preserving.
|durability eyesore issues liability premium reduce-overhead safety traction-aggregate wood xs-100 coatings substrate|
A local dog groomer needed to find a protective skid-resistant solution for their grooming tables. Newer grooming tables are typically made of steel, a slippery surface for paws that increases the risk of injury from slips and falls, particularly in older animals. The grooming company tried using mats but found they wear out and are prone to shifting, bunching and can be difficult to clean. In addition to providing an anti-slip surface, the protective coating they used had to be non-toxic and washable for the health of the animals.
|durability encapsulate fda-approved metal no-vocs safety scratch-resistance sf-515 traction-aggregate xpm xs-100 xtra issues substrate coatings|
|Heavy Equipment Trailer|
A construction company was in need of a new heavy equipment trailer. The trailer they owned had been exposed over a long period of time to heavy wear and corrosion. Unfortunately, the company’s budget did not allow for new purchases. As an alternative to purchasing a new heavy equipment trailer, the company decided to refurbish their existing trailer.The upgrades needed for refurbishment included corrosion protection,abrasion resistance and aesthetic improvement. LINE-X®was chosen for its ability to meet the requirements in all categories.
|abrasion-resistance corrosion-resistance eyesore metal rust-protection sf-515 uv-protection xpm xs-100 xtra issues substrate coatings|
A heavy machinery manufacturer needed a solution for the damage caused inside the hydraulic equipment they manufactured when the equipment is put into use. The quick and inconsistent movement of the machine causes the ram to collide with the cylinder in certain spots, resulting in wear and damage to both pieces.The manufacturer was forced to handle increased warranty claims and repairs. They needed a solution that would both provide impact and abrasion resistance and provide a higher quality product for their customers.
|dent-resistence durability impact-resistant liability metal reduce-overhead sf-515 xpm xs-100 issues substrate coatings|
|Hitch Receiver Plate|
Hitch receiver plates typically re-quire grease or a Teflon®disc to minimize friction between the receiver and trailer. The problem arises when a greased receiver hooks on to a trailer with a Teflon®disc. The greased receiver causes a breakdown of the Teflon coated disc. Each time a trailer is switched,depending on what has been used,the receiver plate must be re-coated. This process is messy, expensive and takes time.
|durability low-maintenance metal reduce-overhead teflon-breakdown xpm xs-350 issues substrate coatings|
Hopper bottom trailers are used primarily to transport fertilizer and grain. The hoppers are exposed to rust damage from the salt used in northern climates, highly corrosive fertilizer dust, and road rash from travel on gravel roads.
|abrasion-resistance chemical-resistance corrosion-resistance dent-resistence durability fda-approved impact-resistant low-maintenance metal rust-protection sanitation xpm xs-350 issues substrate coatings|
The decks of houseboats are subjected to harsh conditions and repeated exposure to the elements.These decks are traditionally constructed with high grade plywood which is covered with a labor intensive fiberglass gel-coat surface. unfortunately, the gel-coat insusceptible to cracks and does not withstand significant impact dam-age. In very little time, the decks of million dollar houseboats become damaged, degrading their appearance and functionality. Due to the EPA restrictions which require the boats to be removed from the water before fiberglass work can be done,maintenance and repairs can cost thousands of dollars.
|abrasion-resistance durability fda-approved fiberglass fire-protection flooring impact-resistant low-maintenance reduce-overhead scratch-resistance traction-aggregate uv-protection waterproofing xs-100 xs-350 xtra issues substrate coatings|
|HVAC Cooling Tower|
HVAC cooling towers are common in all cites. They use the evaporation of fresh water on the cooling tubes to remove heat. Fans are typically installed to enhance the evaporation by providing a constant breeze. The water falling across the tubes that does not evaporate returns to a sump at the bottom of the cooling tower where it is pumped to the top again. Due to the fact the water is in constant motion and the entering air, the sump area tends to collect many contaminants which accelerates its corrosion and deterioration.
|corrosion-resistance metal reduce-overhead rust-protection waterproofing xpm xs-350 issues substrate coatings|
A large manufacturer of industrial bulk dollies and other industrial equipment needed a solution for each of these requirements. They had previously tried a low temperature, low pressure coating but the results were disappointing. This customer was looking for a quality solution that would give their dollies sound abatement properties, last longer and perform better than any of their competitors’ options.
|abrasion-resistance durability metal noise-reduction osha safety wood xs-100 xtra issues substrate coatings|
|Jeep Full Body|
Deserts, snowy mountains, steep rock faces, sand dunes; you name it and most Jeep owners can conquer it. However, these off-road driving environments commonly cause serious vehicle damage including; rust, corrosion, paint scratches or rock chips, dents and general wear and tear of expensive vehicles. Additionally, Jeep owners commonly spend a significant amount of money to up-fit and accessories their Jeeps to conquer even the most extreme trails and terrains. They seek a solution that adds durability, customized vehicle personality, and can withstand the abuse of outdoor conditions and help extend the life of their Jeeps and its accessories.
|abrasion-resistance durability eyesore impact-resistant low-maintenance metal noise-reduction premium reduce-overhead rust-protection scratch-resistance traction-aggregate uv-protection waterproofing xs-100 issues substrate coatings|
The city recreation center was experiencing mold problems on the life-guard platforms in the pool area.Though the center was relatively new, the humid pool environment allowed mold to begin growing on all lifeguard platforms. This resulted in a health hazard for users of the life-guard platforms. It was also very unappealing for guests of the recreation center.The city needed a solution for the platforms that would prevent mold and other fungus to grow. The result must also be low maintenance and visually appealing for guests. The city requested the lifeguard platforms match the existing interior decor.
|durability eyesore fiberglass liability low-maintenance reduce-overhead safety sanitation uv-protection xs-100 xtra issues substrate coatings|
Corrosion damage occurs on all unprotected lift gates and can resulting pitting and eventually functional impairment. One of the most common methods of minimizing corrosion, powder coating, provides a barrier to rust but is easily chipped or scratched exposing the metal beneath to rusting from the inside out. A skid resistant surface is also an important attribute of any lift gate, especially when moving items or loaded carts. Powder coated surfaces do not provide any skid resistance.
|abrasion-resistance durability impact-resistant metal safety scratch-resistance traction-aggregate xs-100 issues substrate coatings|
|Loading Dock Ramps|
Two loading dock ramps at a local foundry were corroding, causing safety hazards while diminishing the value of the equipment and resulting in an eyesore for the company. The spring loading docks are used to allow forklifts easier access to truckloads at the plant. However, forklift traffic and pallets dragged over these ramps were causing serious wear on the ramps resulting in slippery, rusted surface. The Safety Manager at the plant needed a solution to reduce slippage and protect the ramp surface.
|eyesore flooring liability metal osha safety xs-100 issues substrate coatings|
Often times the luggage cart is the first thing guests see and are used to unload, load and transport suitcases or personal belongings to and from their rooms. This frequent use can cause serious wear and tear, or permanent damage to the carts. In an effort to uphold the highest image of quality, hotels are left to either repair or replace damaged carts which can be cost prohibitive. Hotels around the world depend on their staff, facilities and equipment to provide the highest quality of customer experience. Applying LINE-X will increase the durability and ensure appealing aesthetics of these luggage carts for hotel guests.
|abrasion-resistance dent-resistence eyesore impact-resistant liability low-maintenance reduce-overhead scratch-resistance waterproofing wood xs-100 xtra issues substrate coatings|
Marine vessels and pleasure craft are constantly battling wet and slippery floors, stains and rot. Routine maintenance, repainting, and resurfacing are often required to keep ahead of those problems. Installing new marine grade plywood and coating it with colored LINE-X allowed the owner to restore their boat with a factory looking interior which was both waterproof and UV stable.
|durability eyesore fiberglass flooring gel-coat impact-resistant low-maintenance uv-protection waterproofing wood xs-100 xtra issues substrate coatings|
|Micro Brewery Floor|
A local micro-brewery approached LINE-X for a product to seal a new brewery floor. This customer was renovating a space in the restaurant to begin brewing beer in-house. During the brewing process, hundreds of gallons of water are regularly consumed for washing tanks, tools and hoses. This water combines with cleaning agents and other brewing products in a continuous washing and rinsing process. Before the renovation, the brewery tanks drained onto an unfinished concrete floor. Without protection, the concrete floor would quickly deteriorate requiring costly maintenance and upkeep.
|chemical-resistance concrete corrosion-resistance flooring waterproofing xpm xs-350 issues substrate coatings|
A vermiculite mining company was experiencing abrasion problems on their four shaker tables. The company needed to protect its 8′ x 25′ tables from abrasion and corrosion caused by the continuous exposure to rock and slurry. Previous attempts at protecting the plywood and pine surface included using a paint-like plastic product, but it did not adhere well to the substrate and failed. The company required the protective coating that woudl permanently adhere to the substrate, and protect against constant abrasion and impact.
|abrasion-resistance corrosion-resistance durability encapsulate low-maintenance reduce-overhead waterproofing wood xs-100 issues substrate coatings|
A retooling subcontractor needed substantial, lasting protection on four 5’ tall mixing shafts. In use, the shafts are connected to polyurethane mixers and immersed in a chemical separating tank where they agitate heterogeneous mixtures of chemicals to draw out pure chemicals.Originally the shafts had been coated with an epoxy, but the coating was quickly degraded by the chemicals and the shafts began to rust. The retooling sub-contractor then tried outsourcing the protection to a urethane coatings company, but this polyurethane material didn’t hold up over time. The shafts needed to be protected by a product that had high chemical resistance and wouldn’t flake or melt off into the chemical bath.
|chemical-resistance corrosion-resistance durability metal reduce-overhead se-500 sf-515 issues substrate coatings|
|Modern Noahs Ark|
This ‘modern day Noah’s Ark’ is powered by recycled batteries from pre-owned Electric Vehicles and has been created to help accommodate people during torrential storms and flooding. The structure is made of wood, which would potentially degrade in water, not to mention the potential damage from fast-moving debris in raging flood waters or sharp terrain unseen under the torrent. The client was looking for a lining that could protect the wood from water and mitigate the potential impact damage that can occur in flooded waters.
|abrasion-resistance durability impact-resistant metal waterproofing xpm xs-350 issues substrate coatings|
Commercial and agricultural equipment is subject to harsh conditions and repeated exposure to the elements, including moisture and the decay of organic material. Mower decks are no exception. In a short period of time, valuable equipment can rapidly rust, corrode and deteriorate. Maintenance, repair and ultimately the replacement of expensive equipment is costly. It also takes the equipment out of service causing down time for the owners.The mower deck needed protection from rust and corrosion that would last season after season.
|corrosion-resistance metal reduce-overhead rust-protection sf-515 xpm xs-350 issues substrate coatings|
|Niagara Parks Dept|
Niagara Falls is a world famous collection of 3 massive waterfalls that combine to create the highest flow rate of any waterfall in the world. Located on the Canadian and U.S. boarder, the falls attract tens of millions of tourists every year and is a leading source of revenue for the Niagara Falls (Ontario, Canada) economy. To support this tourism, the parks department constructed a large infrastructure of walkways, sitting areas and viewing platform adjacent to the falls. All along these areas are steel handrails, outdoor seating and tables, signs, lights and other park fixtures. Due to the enormous amount of moisture, and constant exposure to the surrounding water environment, the parks department is constantly battling to maintain the integrity and appearance of these fixtures. Typical paints and other coatings are not sufficient to protect the steel substrates in such a corrosive environment – so a more durable, longer-lasting solution was needed.
|corrosion-resistance durability low-maintenance metal reduce-overhead rust-protection ultra waterproofing xs-100 issues substrate coatings|
|Off Shore Oil Rig|
On the oil rig SOUTH ARNE in the Danish North sea, they were experiencing a constant loss of fluids in their Clean in Place (CIP) tank. The fiberglass tank didn’t have the right structural support, resulting in cracks in the joints of walls and floor. The operators needed and cost effective solution which would not only provide the structural support needed, but must minimize downtime.
|fiberglass leaking reduce-overhead safety waterproofing xs-350 substrate issues coatings|
School buses, county and state service vehicles and public utility vehicles all have oil pans that are susceptible to serious damage during routine driving condition. Rocks android debris often ding or dent the pans. They can also scratch the thin paint exposing the bare steel under-neath to corrosion, rust and eventually leakage. The road debris can even puncture the oil tank, especially after repeated impacts. The risk is compounded when the vehicle travels on gravel or dirt roads or on rural routes.A fleet of school buses in the Mid-west was experiencing this problem and looked to LINE-X® for a strong,durable protective coating that would provide long-term impact resistance.
|corrosion-resistance dent-resistence impact-resistant metal reduce-overhead rust-protection sf-515 xpm xs-100 issues substrate coatings|
Extreme weather can wreak havoc on valuable outdoor equipment. Rust and corrosion will inevitably damage metal exposed to harsh conditions. Steel enclosures like those found at the Tanajib compound, ARAMCO, Saudi Arabia, had pronounced rusting due to the presence of high humidity, salt and heat in the coastal area.This environment caused the existing paint to crack and peel with corrosion present in several spots. If left untreated, underlying rust or corrosion could result in immature failure of the equipment or enclosure.Notably, the rooftops of these enclosures showed a higher corrosion rate than the rest of the structure Moisture accumulating on the roof, combined with direct UV rays and presence of salt, accelerated the corrosion.The aim of this application is to control corrosion and prolong the equipment lifespan under harsh weather conditions present in the region.
|durability eyesore low-maintenance metal reduce-overhead rust-protection xpm xs-350 issues substrate coatings|
As municipalities and other stewards of green spaces look to revitalize outside areas, one of the most common investments is park benches. New park benches are available in cast concrete, but they are costly and don’t maintain the same nostalgic feel as traditional metal and wood slat benches.The traditional wood and metal benches at a local park were old,ragged looking and the victims of repeated vandalism. The state park service needed a solution to refurbish the benches without having to spend a great deal of money to replace them. They looked to LINE-X®to renovate the existing benches, refreshing their look and extending their life.
|abrasion-resistance corrosion-resistance encapsulate eyesore low-maintenance metal rust-protection sf-515 waterproofing wood xpm xs-100 xtra issues substrate coatings|
The Hospital & Health System Association of Pennsylvania administration office needed a solution for a second floor deck that was leaking onto the first floor entrance lobby. Built about 25 years ago of a watertight membrane under concrete pavers and epoxy grout, the deck had deteriorated significantly and grout joints were popping up in some areas allowing water to seep in. They needed the coating to stop the water leak, be slip resistant, and complement the look of the building.
|concrete flooring leaking traction-aggregate waterproofing xs-100 xtra substrate issues coatings|
|Petrol Island Refurbishment|
Petrol station pump islands made of steel bezel and concrete often fail due to continuous use. Diesel and gasoline spills rust and corrode the metal bezel, and car tires wear down the concrete islands over time. As a result, the company had to fix and paint the islands every six to twelve months. That was a problem for the company, because even between re-coating, the islands were looking worst for wear.
|chemical-resistance concrete corrosion-resistance eyesore flooring low-maintenance metal reduce-overhead rust-protection xs-350 xtra issues substrate coatings|
Governments are recognizing older pressure-treated wooden playgrounds as safety hazards for children. Slivers of pressure-treated wood can get under kids’ skin. These slivers contain toxic chemicals such as arsenic. In New York State, schools and municipalities are now mandated by the government to address pressure-treated wood structures: they must either be completely coated or replaced with steel or plastic structures. Replacing the structures with comparable new structures would be extremely costly. With LINE-X, the structure can be made safe, durable, long lasting, and will comply with state regulations, all for less money and in about a week. An even layer of LINE-X over the pressure treated wood keeps the wood from slivering and harming children.
|durability encapsulate liability safety traction-aggregate waterproofing wood xs-100 xtra issues substrate coatings|
|Police K-9 Unit|
Police dogs, or K-9 officers, are in widespread use across the United States serving at all levels of law enforcement including federal, state, county, and city departments. They are utilized for a wide variety of duties including suspect tracking, search and rescue, weapon and contraband detection. One common area that is a challenge for K-9 Units is transportation. Specialized police vehicles are used to transport the team between deployments. Police dogs can quickly play havoc on traditional automotive seats. Typically, a police department will purchase a specially adapted container that installs in the rear seat of a K-9 patrol car. This container is often made of aluminum and needs a tough durable coating for the safety and comfort of the dog. Without a protective coating, the aluminum surface would be very slippery for the K-9 officer. One police department came to LINE-X looking for a safe and suitable solution.
|corrosion-resistance flooring metal safety traction-aggregate xs-100 issues substrate coatings|
Many law enforcement agencies provide armor shields to protect their officers on duty. The shields are made of almost an inch of dense KEVLAR fiber wrapped in a nylon fabric, and are very expensive to replace. Large shields can run up to $2,000 each. Normal use conditions cause the thin protective nylon fabric to fray and tear easily, exposing the KEVLAR underneath to moisture. Water causes KEVLAR to expand, and the shields deteriorate quickly. With such a high price tag, law enforcement needs a way to extend the service life of its protective equipment.
|deterioration kevlar premium waterproofing xs-100 issues substrate coatings|
|Portable Living Quarters|
There are a wide variety of configurations and materials commonly used in the fabrication and construction of portable modular buildings. These structures can be used as utility buildings, portable living quarters, command centers and much more. Despite their different functions they have one thing in common: to provide protection and security wherever they go. In this case, mobile living units were fabricated from 40 ft. steel shipping containers to house workers at remote construction sites. These trailers were designed to provide personnel with a climate controlled shelter with cooking and sanitary facilities that would stand up to consistent and rough use.
|abrasion-resistance durability flooring low-maintenance metal waterproofing wood xs-100 xtra issues substrate coatings|
|Power Transmission Towers|
Power Transmission Towers often rust and corrode over time, and without proper maintenance, utilities may need to invest in untimely and costly replacement. Because towers are sometimes located close to major roads, it is important to the surrounding community that these structures are properly maintained. In the past residents have complained of the visual appearance of the towers. As a result, this customer needed a protective coating that is aesthetically pleasing while it also protects the towers from rust and corrosion.
|corrosion-resistance deterioration eyesore metal reduce-overhead rust-protection xs-350 issues substrate coatings|
Due to urban sprawl more and more communities and engineers are taking additional steps to protect and extend the service life of new and existing wastewater structures. A municipality in one such area controls a pumping station that has been degrading slowly over time. The walls of these stations are particularly susceptible to the corrosive environment and will easily deteriorate without protection. As infiltration and the effect of corrosive gases are the two primary causes of deterioration in a collection system, the addition of a corrosion barrier to a new structure will not only ensure a longer service life to the system, it will make the rough concrete surface easier to clean.
|concrete corrosion-resistance deterioration eyesore high-ph low-maintenance reduce-overhead waterproofing xs-100 substrate issues coatings|
|Railroad Cross Tie|
In the railroad industry cross ties are often made from timber. However for traffic and heavily used areas such as turnouts and switch yards, they can be made from steel which generates several advantages to the railroad. Steel ties are stronger than timber, this allows for wider tie spacing. It also reduces material costs in building the rail bed. Steel rail ties also maintain the track gauge. Allowing for the railroad curves to be smoother and safer. The challenge of steel cross ties keeping them stable in the gravel ballast. The smooth hard steel does not allow the gravel to “bite,” or maintain proper alignment. This can lead to increased maintenance cost.
|durability metal reduce-overhead xs-350 issues substrate coatings|
Recycle bins throughout U.S. National Parks take extreme abuse. They are continuously exposed to severe weather, sand storms, and UV damage. The interior of the bins are equally damaged by such items as garbage, aluminum cans, glass bottles, and food waste. These elements degrade the appearance and functionality of the bins. The abuse wears away the thin coat of paint used to protect the metal underneath creating an opportunity for rust and corrosion, while also turning an important asset to the park into an eyesore. Recycle bins usually require replacement in less than a year. The National Park Service needed a solution that would not only protect the recycle bins, but would also keep the bins aesthetically appealing to the public. In addition, they required the solution to be cost effective
|abrasion-resistance chemical-resistance corrosion-resistance dent-resistence deterioration durability eyesore impact-resistant leaking low-maintenance metal reduce-overhead rust-protection sanitation uv-protection issues substrate|
Companies around the world rely on refrigerated vans to get their food goods transported from the manufacturing facility to their final destination. Most of these vans are stripped down utility vehicles with little to no insulation. In areas with hot climates, such as summers in Monterrey, Mexico, refrigeration units are frequently overworked and unable to keep the products inside at the desired temperature. These customers need some kind of insulation to help reduce the heat inside the vans.
|durability encapsulate foam noise-reduction xs-100 xtra issues substrate coatings|
|Restaurant Bar Tables|
Restaurant surfaces take a lot of abuse from cleaning agents and hot items, both of which can significantly damage a surface. Replacement costs can be high and new items may be susceptible to similar
deterioration. The bar tables at a local restaurant were originally topped with a wood laminate which was damaged and began pealing over time. The tables were a health concern for customers as routine cleaning was difficult.They were also a visible embarrassment to the restaurant owner.The restaurant owner wanted to avoid the expense of purchasing new equipment and needed a protective coating that was durable, attractive, heat and chemical resistant,and would not chip or peel.
|durability encapsulate eyesore fda-approved sanitation wood xs-100 xtra issues substrate coatings|
|Restaurant Garbage Cans|
The local branch of a popular restaurant chain was experiencing serious decay in their steel garbage cans. The cans are essentially steel drums approximately 30 gallons in size. Food waste, which is extremely corrosive, consistently makes its way to the bottom of the cans and is difficult to clean out. Asa result, the cans rust out and must be replaced every 6-12 months.Plastic garbage liners weren’t enough to protect the inside of the garbage can. Previously, the company tried a coating from another company, but the coating failed.They approached the local LINE-X for a higher quality solution. They needed a protective coating that would prevent corrosion and still came it at a reasonable price point.
|corrosion-resistance leaking low-maintenance metal noise-reduction rust-protection sanitation xs-100 issues substrate coatings|
Truck beds aren’t the only parts of personal vehicles that take a beating. The grill, hood and rocker panels of vehicles are vulnerable to chips by rocks and other road debris, even during normal driving conditions. These chips diminish the appearance of the vehicle while leaving it susceptible to rust. Car “bras” are useful for protecting the grill and hood of a vehicle from damage but they trap moisture when it rains and are often unsightly and become damaged over time. LINE-X can be applied to the front grill, hood and rocker panels for a permanent accessory that protects the vehicle from chipping and rust damage while enhancing the appearance.
|abrasion-resistance chip-resisence dent-resistence impact-resistant metal scratch-resistance xs-100 xtra issues substrate coatings|
|RV Shower and bathroom Facilities|
A popular RV campsite was building a shower and bathroom facility.They were in need of a flooring solution that would be sturdy enough to withstand constant foot traffic of the guests while remaining aesthetically appealing.In addition, because of the showers and steam involved, it was imperative the solution be non-skid and water resistant.
|eyesore sanitation traction-aggregate waterproofing xs-130 issues coatings|
|Sand Blast Cabinet|
The largest producer of reclaimed glassware in the world uses a sandblaster to frost their goblets and tumblers. Due to the force of the sand blasting, the original door made of 5mm thick mild steel eroded forming a hole within approximately 12 weeks time costing the company replacement fee sand production downtime. The customer required a solution that would withstand powerful blasts on a continuous basis preventing downtime from its production schedule.
|abrasion-resistance durability impact-resistant low-maintenance metal noise-reduction reduce-overhead xs-100 issues substrate coatings|
|Sea Water Desalination|
The world’s largest company in the field of sea water desalination (SWCC) consulted LINE-X to find a solution to protect the company’s brine drain channels. Each desalination plant consists of several production units. Each unit has a drain channel that allows the return of brine to the sea water. The brine has a very high salt concentration and is delivered at a high temperature 50-80 C to the sea through concrete channels.Over time the concrete channels suffered great structural damage. Salt water penetrated through the concrete to the structural steel leading to corrosion and failure. The channel walls were critically damaged and falling apart in several areas.
|chemical-resistance concrete corrosion-resistance deterioration high-ph reduce-overhead xs-350 issues substrate coatings|
|Seamless Flat Roofing Membrane|
A factory roof in Cyprus had major issues with water ingress, causing numerous problems internally inside the building. The roof was previously covered with bitumen, a type of asphalt commonly used for flat roofs. Bitumen can breakdown prematurely in fluctuating climate and weather conditions. In the heat of the summer months, the bitumen had cracked along the joints allowing the rainwater to seep through the existing membrane. Moreover, bitumen tends to absorb rather than reflect heat which can superheat the building below. A long-lasting solution was needed to re-waterproof the roof.
|durability etag-005-part-6-roof leaking roofing uv-protection waterproofing wood xs-100 xtra issues substrate coatings|
Research indicates that the quality of the waiting area – layout, cleanliness, light, color, noise, imagery,etc. – can significantly impact a consumers experience and perception of service. Enhancing the waiting area can be a simple and cost effective route to providing an appealing, relaxing atmosphere for the consumer. A popular community car wash needed a solution to visually enhance their customer waiting area while protecting the furniture from corrosion damage caused by UV deterioration and chemicals found in the overspray of each wash. They looked to LINE-X to provide a timely, cost-effective solution providing long-lasting results that would be visually appealing to the consumer
|corrosion-resistance eyesore low-maintenance metal reduce-overhead uv-protection xs-100 issues substrate coatings|
Impact and abrasion can easily wear away the thin layer of protection paint on service vehicles exposing the metal beneath to corrosion. The resulting of deterioration of the metal will require maintenance or re-placement of the part. It also de-tracts from the overall appearance of the vehicle and image of the company. Additionally, employee steps can become slippery when exposed to the elements increasing slip and fall hazards. A national railway company wanted to protect their service vehicles from corrosion while maintaining the professional corporate look of the company. They also wanted employee walk areas to be protected against slip resistance.
|abrasion-resistance deterioration durability impact-resistant metal rust-protection safety traction-aggregate xs-100 issues substrate coatings|
|Sewage Tank Lining|
Sewage purifying tanks, like these from the Emek Hefer Region of Israel, are designed to purify waste water from the surrounding town. Waste water contains many harsh substances that slowly ingress into the walls and floor of the tank, degrading the metal and causing the sewage to leak and contaminate the groundwater. A solution was needed to provide a watertight barrier that could prevent the numerous chemicals and acids from seeping into ground water. The chosen application would have to offer a very quick turn-around to allow the water purification system to return to service with minimal disruption.
|chemical-resistance corrosion-resistance deterioration durability epx leaking sanitation waterproofing xs-350 issues coatings|
|Sewage Treatment Plant|
CP Kelco is a global producer of hydrocolloids. At the facility in Denmark they needed the floor of 2 sewage water tanks 450 m2 each to be re-coated. The facility could not live with a long shutdown time because of a 50 % reduction of production in the factory.
|concrete corrosion-resistance epx leaking low-maintenance reduce-overhead xs-350 substrate issues coatings|
Sheep pens are regularly exposed to urine and feces that must be allowed to drain to keep the pen sanitary. Additionally, the floor of the sheep pen must be even and level.Traditional pen flooring consists of precisely spaced wood or metal slats that allow waste material to fall through, but these floors are difficult to clean and can allow straw bedding to fall through as well.To keep with the look of his house and the neighborhood, the owner of a small flock of sheep constructed a pen to look like a shed. The floor was made of standard plywood with several 1” drainage holes. The owner needed protection that would prolong the life of the pen floor by protecting it from the sheep urine and feces.
|flooring rotting sanitation waterproofing wood xs-100 issues substrate coatings|
King’s Daughters Medical Center in Kentucky had problems with the safety and sanitation of their shower stalls. The showers were tiled, a slip hazard in this wet environment. The grout was unsanitary, holding onto moisture and creating an environment where mold, bacteria and other germs could grow. The tile was easily damaged from hospital equipment. Once damaged, moisture seeped behind the tile causing the drywall to deteriorate allowing mold and bacteria to grow in the wall. The hospital required a solution for the shower stalls that would provide: 1) A seamless floor-wall-ceiling membrane. 2) A slip resistant surface texture on the floors. 3) A smooth and easily cleanable walls and environment that would inhibit fungus and bacteria growth a durable. 4) A long lasting solution an aesthetically pleasing, uniform, and with color.
|aspart-x concrete flooring roofing safety sanitation traction-aggregate waterproofing wood xs-350 xtra coatings substrate issues|
Musicians and venues around the world rely on their sound equipment and speaker systems to perform nightly. Often times this equipment is being moved to and setup at concert venues on a weekly basis. This frequent moving and transport can cause serious equipment wear and tear that can drastically cut down the life expectancy of the speakers. Additionally, replacing this equipment can be extremely cost prohibitive so protecting it from damage or product failure is crucial. Speaker manufacturers, musicians and entertainment companies seek a solution to increase the durability and ensure performance of their extremely valuable music equipment.
|chip-resisence dent-resistence durability eyesore impact-resistant metal reduce-overhead wood xs-100 issues substrate coatings|
A catering company invested in a specialized rig to use during sporting events – a 53 foot commercial kitchen on wheels! While the kitchen is state of the art, the floor was not. Over time, the original vinyl tile floor began to loosen. The loose tiles got in the way of the crews feet as they moved throughout the kitchen creating a safety hazard. Additionally, the areas in the floor with missing tiles were unsightly and hard to clean. As a result, the health inspector was very critical of the floor’s condition. The catering company risked failing a health inspection if the floor was not fixed. The catering company chose to remove the entire vinyl floor. Instead of replacing it with a new vinyl floor, they chose to use a tougher, more durable option.
|durability eyesore fda-approved metal reduce-overhead sanitation uv-protection waterproofing wood xs-100 xtra issues substrate coatings|
|Steel Road Plate|
In many areas of our transportation infrastructure and networks there are steel plates in the road. They are often used at facility entrances and exits to form part of a security or barrier structure. These plates receive constant wear from car and truck traffic including road grit, salt, and other environmental effects that make preservation a challenge. Typically steel plates need to be painted and preserved each year. Besides the obvious problems with corrosion, rusty steel plates do not present a professional image at the entrance or exit of a company’s facility.
|aspart-x chemical-resistance corrosion-resistance durability eyesore impact-resistant metal rust-protection safety uv-protection xs-100 coatings issues substrate|
Nearly all police departments in the United States have some form of S.W.A.T. vehicle. These vehicles are used to transport heavily-armed Special Weapons and Tactics teams or specialized equipment into difficult and challenging situations. These vehicles come in numerous designs and configurations depending on the needs of the department. In addition to the safety they provide, the appearance of the trucks is also a point of pride to the officers who use them. For one police department, their S.W.A.T. vehicle was taking particular external abuse. With officers in full gear riding on platforms against the outside of the truck, the standard paint was scrapping off and exposing the bare metal underneath. To prevent corrosion of the truck body, the department came to LINE-X.
|abrasion-resistance chip-resisence dent-resistence impact-resistant low-maintenance metal premium rust-protection safety scratch-resistance xs-100 issues substrate coatings|
Swimming starting blocks are not only necessary for competitive swimming but they are a valuable tool for any venue that provides the opportunity to show school pride.The University of Nebraska purchased stainless steel swimming blocks 30 years ago. Due to the constant contact with chlorinated water, the blocks were suffering from extreme corrosion even though they had been refinished. The corrosion was not only unsightly but was also damaging the blocks limiting the lifespan of the school investment. The cost of replacement on a school’s limited budget was unfeasible. LINE-X offered a quick solution that was cost-effective, provided long-lasting results and added the bonus of skid resistant safety features necessary in blocks. Furthermore,the solution presented the University with quality, vibrant starting blocks that screamed school spirit.
|corrosion-resistance durability eyesore oxidizing sf-515 xs-100 xtra issues coatings|
|Tankers and Vacuum Trucks|
Companies in North America have the constant challenge of keeping their equipment looking clean and new. Metal tanks need routine maintenance and repainting to keep on top of corrosion problems, but need protectiuon from constant abrasion on gravel roads; without protection they too will look old and unkept.
|abrasion-resistance chip-resisence dent-resistence eyesore low-maintenance metal reduce-overhead rust-protection scratch-resistance xs-100 xtra issues substrate coatings|
City and county road crews across the country use tractors and other equipment to maintain roads, parks, and other public areas. These crews perform numerous jobs including lawn and brush mowing, construction and routine maintenance. Tractor cabs and canopies are a popular solution for maintenance departments to protect crews from damaging sun and debris. Because this equipment is operated in rugged areas such as ditches and heavily treed areas, the plastic canopies are often scratched or cracked from overhanging branches. A city maintenance manager came to LINE-X looking for a solution to strengthen his tractor cabs and reduce his maintenance costs.
|abrasion-resistance chip-resisence dent-resistence durability eyesore impact-resistant low-maintenance metal plastic reduce-overhead rust-protection xs-100 xtra issues substrate coatings|
Companies in North America have the constant challenge of keeping their equipment looking clean and new. Flat deck trailers aren’t immune to this problem. Steel decks require routine maintenance and repainting to keep on top of corrosion problems. Wood decks rot and are difficult to clean. Aluminum doesn’t suffer the same corrosion problems but abrasion tends to cause excessive wear. Customers in the market for new trailers are demanding quality, with problem free coatings.
|corrosion-resistance durability low-maintenance metal reduce-overhead rust-protection xs-100 issues substrate coatings|
Equipment that is used to move waste operates in a very demanding environment. As garbage breakdowns, chemicals are released and can combine with other materials to create caustic runoff. In addition to eroding metal parts on expensive equipment, this runoff can also damage rubber and even cause unhealthy situations for workers. Replacement is costly and time consuming.A city municipality was experiencing corrosion issues in the tray that contains the hydraulic compacting ram and hoses of their trash compactor.The corrosion was accelerated by the caustic runoff from the waste.The City needed a solution that would resist the runoff, protect the hydraulic equipment and increase the overall maintenance cycle of the equipment. They needed the solution in a time efficient manner preventing downtime of the equipment.
|corrosion-resistance deterioration leaking metal reduce-overhead sf-515 xs-100 issues substrate coatings|
|Tri-Axle Dump Truck|
A road and bridge contractor required an application to protect the floors of their Tri-Axle dump trucks from extreme impact, abrasion and corrosion. These trucks were consistently exposed to extreme impact and abrasion from cement, rocks and gravel. The floors of the trucks were especially susceptible needing to be replaced every four to five years at a minimum cost of $3,000. Due to the fact the company owns at least 25 dump trucks, having to replace the floors was becoming increasingly costly. It was mandatory that the product used to protect the floors would be able to withstand the constant extreme abuse of the construction sites while living up to the client’s image requirements. They also needed the solution to be time efficient preventing extensive downtime.
|abrasion-resistance chemical-resistance cu-400 dent-resistence durability impact-resistant metal reduce-overhead sf-515 issues coatings substrate|
Metal or painted fenders show dam-age easily. Even a small rock will leave a dimple or chip the paint. Enthusiasts spend thousands of dollars ensuring their vehicles look great. Damaged fenders or accessories significantly detract from the look and value of the vehicle.A local company specializing in trikes and sidecar kits has LINE-X spray the back fenders, steps and the front fender of their vehicles to protect them from the damage caused by normal driving. The company is so pleased with the LINE-X product, they referred an out-of-town couple to the local store for this application.
|abrasion-resistance chip-resisence dent-resistence durability metal noise-reduction reduce-overhead scratch-resistance uv-protection xs-100 xtra issues substrate coatings|
Consumers are expecting more luxuries out of their vehicles than ever before. One of the most important things expected from vehicles is a quiet ride. To accommodate consumers, most vehicles are equipped with sound-deadening insulation.Unfortunately, the insulation is inadequate, allowing road noise into the vehicle. This is both annoying to the passengers and lessens sound quality from the stereo system.Traditional aftermarket sound deadening options include foam or foam-like squares that break down overtime and require messy adhesive to apply. These options also require sections to be pieced together,which is often rough and leaves gaps for noise to pass through.Vehicle owners looking for a solution to this noise problem are turning to LINE-X.
|durability eyesore flooring low-maintenance metal noise-reduction rust-protection waterproofing xs-100 issues substrate coatings|
|Underground Water Reservoir|
In certain parts of England the treated potable water is stored in underground reservoirs prior to being distributed to homes and businesses. These underground tanks are typically constructed of concrete or brick/block with a concrete reinforced roof. The land above these reservoirs is used for purposes such as farming which includes the use of fertilizers and chemicals. Constructed 30 to 40 years ago, the concrete roofs of the reservoirs have become porous potentially allowing dirty rain water and farming chemicals to penetrate the concrete and enter the drinking water. The customer was looking for an effective long term solution of sealing the reservoirs that did not require rebuilding or taking them out of service.
|ansi-nsf-61 concrete deterioration oxidizing waterproofing xs-350 issues substrate coatings|
Utility trucks are used by contractors and commercial personnel to help complete some of the most demanding work. These trucks must be able to transport heavy and often bulky equipment to and from the job site in a safe and secured manner. Without the use of these trucks many contractors and commercial personnel would not be able to complete their jobs.A local contractor came to LINE-X in need of a solution for the rust corrosion on his utility bodies. The factory paint protecting these vehicles was quickly wearing away, allowing severe rust to corrode the bed and tops of the cabinets. Fine particulates in the air compounded the issue. In the past they had tried a variety of coating solutions including slip-resistant adhesives and other do-it-yourself coatings. None of these effectively held up to the demands of working around these harsh environments.
|durability metal noise-reduction reduce-overhead rust-protection xs-100 issues substrate coatings|
There is a wide variety of configurations and materials commonly used in the fabrication and construction of utility buildings. But they all have one thing in common, the need protection from the elements. Whether concrete, steel, wood, aluminum or fiberglass, Mother Nature will find away to break into any structure.Valuable equipment can be exposed to dirt, moisture and pests that can damage or destroy your assets, requiring premature repair or replacement.
|durability eyesore metal reduce-overhead uv-protection waterproofing wood xs-100 xtra issues substrate coatings|
|UTV Cargo Bed|
UTV cargo beds are exposed to extreme conditions while loading, hauling, and working in the field. This workload often leads to paint chipping, rusting, corrosion, and denting. All of which decreases the life expectancy and value of the UTV
|chip-resisence corrosion-resistance dent-resistence eyesore low-maintenance metal plastic reduce-overhead rust-protection wood xs-100 issues substrate coatings|
Black mold can occur in any area prone to moisture putting residents at risk of persistent headaches, fatigue, memory loss, chest pains and more. While many people might not see the effects of black mold for years, the administration of a VA Hospital had to spend excessive time and money preventing the possibility. The VA hospital’s compressors produce condensation that builds up in the tanks and splashes on adjacent walls. In addition, the water filtration systems can leak causing the need for drywall in those rooms to be re-placed frequently.The customer required a seamless water-resistant barrier on the walls up to three feet high in some areas to prevent splashes from rotting the drywall while containing potential floods in these areas.
|concrete drywall flooring low-maintenance mold-prevention no-vocs reduce-overhead safety sanitation waterproofing xs-100 substrate issues coatings|
Vault toilet systems in National Parks are severely abused by outdoor elements. The vault toilets in Joshua Tree National Park in California were particularly susceptible to damage caused by extreme temperatures, UV exposure and sand storms. They are also put to the test by the campers who set fires on the floors and defaced the walls and ceiling. The park/campground staff are responsible for keeping the facilities clean and aesthetically appealing for the public. Some of the vaults that have fire or other damage need to be repainted on a daily basis. This becomes very costly in materials and labor for the National Park service.The National Park service required a solution for the constant maintenance and cost issues surrounding the vault toilet systems.
|concrete durability eyesore fire-protection flooring low-maintenance premium reduce-overhead sanitation xs-100 xs-152 xtra substrate issues coatings|
|Vehicle Restoration- Undercarriage Light Industrial|
An automotive enthusiast was restoring a vehicle and needed impact and abrasion protection on the undercarriage. The vehicle needed significant protection that would not chip or easily wear while also protecting from rocks and other road debris. It was imperative that the protection not interfere with the performance of the vehicle.The enthusiast also wanted to maintain the original “look” of the vehicle by color matching the protection to the exterior paint.
|durability eyesore metal noise-reduction sf-515 waterproofing xpm xs-100 xtra issues substrate coatings|
|Warehouse Tire Centers|
The walls of an international chain of membership warehouse tire centers are being coated with LINE-X for aesthetics and protection. Tire and repair shops are notorious for showing significant wear on their walls from oil, rubber, and storing old tires.This staining detracts from the company image and requires heavy cleaning and maintenance. The centers initially used a cosmetic solution to create an attractive customer view. This process required constant upkeep. After the first couple tire centers were completed, the warehouse center discovered that applying LINE-X as a protective coating enhanced not only the look of the store, but also protected the interior walls from tool damage and required less maintenance.
|abrasion-resistance dent-resistence durability eyesore impact-resistant low-maintenance premium reduce-overhead uv-protection xs-100 issues coatings|
Decks provide a beautiful and functional addition to many homes. They can also be a critical element in protecting the home from water damage due to leaks. Failed home waterproofing causes tremendous damage that can cost thousands of dollars in damage and repairs. Material selection is the most crucial aspect of waterproofing. The best application of a poor product will still result in a failed application. Investing in the proper materials and application up front can save the homeowner from tremendous cost and frustration later. In many parts of the country, LINE-X is the best known waterproof decking solution. Local contractors specify LINE-X by name in their plans and build decks to the proven standards that ensure a complete long lasting solution for the homeowner.
|concrete durability eyesore flooring impact-resistant reduce-overhead rotting waterproofing xs-310 substrate issues coatings|
|Waterproofing Outdoor Showers|
During the warm summer months, pool goers and beach goers make the most of outdoor showers. At many public beaches and hotel pools an outdoor shower is provided to help keep guests comfortable and pool areas clean. While convenient for guests and visitors, outdoor showers can be a maintenance challenge if not properly constructed. Unprotected wooden walls and floors can rot very quickly in damp environments. One city parks manager came to LINE-X looking for a permanent, durable and aesthetically pleasing waterproofing solution.
|eyesore low-maintenance rotting sanitation uv-protection waterproofing wood xs-310 xtra issues substrate coatings|
|Wrought Iron Furniture|
Wrought iron furniture is popular all over the country. Homeowners enjoy the classic look of the furniture on their deck or patio. They also like its somewhat heavy construction which makes the furniture stable in windy conditions. The most common topcoat finishes found on wrought iron furniture are either paint or powder coating. While owning wrought iron furniture has several advantages over other options for outdoor and patio furniture, it does have several disadvantages. One of the major disadvantages of wrought iron furniture is its inability to fight the outdoor elements, despite a topcoat finish. Whether the initial coating is paint or powder coating, eventually the furniture will rust and cause unsightly, brown and reddish colored streaks and stains on both the furniture and deck or patio. Because LINE-X is nationally recognized for protecting truck beds against rust and corrosion, a customer decided to have their wrought iron furniture covered and protected by LINE-X.
|chip-resisence corrosion-resistance dent-resistence durability metal rust-protection scratch-resistance uv-protection xs-100 xtra issues substrate coatings|